ISO NSS. adv. auto technology banner. A discussion started in but continuing through Q. We have a customer, that we supply some zinc. Information to the interpretation of the result. The salt spray test is done according to DIN EN ISO (NSS). The paint thickness is measured. The salt spray (or salt fog) test is a standardized and popular corrosion test method, used to Other important relevant standards are ISO, JIS Z and ASTM G The most common test for steel based materials is the Neutral Salt Spray test (often abbreviated to NSS) which reflects the fact that this type of test.
|Published (Last):||11 October 2011|
|PDF File Size:||9.77 Mb|
|ePub File Size:||20.70 Mb|
|Price:||Free* [*Free Regsitration Required]|
The number of cycle repeats and therefore the test duration is variable.
That’s the only way to know for sure. Daily checking of testing parameters is necessary to show compliance with the standards, so records shall be ixo accordingly.
Equivalence between ASTM B vs. ISO NSS
This test can be used to test the relative resistance to corrosion paints on steelwhen exposed to a changing climate of dilute salt spray at ambient temperature, followed by air drying at and elevated temperature. Requirements are agreed between customer and manufacturer.
This test can be used to test the relative resistance to corrosion of aluminium alloys when exposed to a changing climate of acetic acid salt spray, followed by air drying, followed by high humidity, all at an elevated temperature.
Test specimens are placed in an enclosed chamber and exposed to a continuous indirect spray of salt water solution, prepared in accordance with the requirements of the test standard and acidified to pH 3. If there is a minimum volume required by a particular salt spray test standard, this will be clearly stated and should be complied with.
Results are represented generally as testing hours in NSS without appearance of corrosion products e. George Gorecki – Naperville, Illinois A. ISO standards by standard number. March 16, A.
The dij application of the salt spray test is therefore enabling quick comparisons to be made between actual and expected corrosion resistance.
Views Read Edit View history. Testing periods range from a few hours e. This test is also referred to as an ASS test.
Corrosion tests in artificial atmospheres – Salt spray tests
We have a customer, that we supply some zinc electroplated mechanical components to. ASTM G85 annex A1 — Acetic Acid Salt Spray Test non-cyclic This test can be used to determine the relative resistance to corrosion of decorative chromium plating on steel and zinc based die casting when exposed to an acetic acid salt spray climate at an elevated temperature.
The second climate cycle comprises 0. The salt spray tests are particularly useful for detecting discontinuities, such as pores and other defects, in certain metallic, organic, anodic oxide and conversion coatings. These standards describe the necessary information to carry out this test; testing parameters such as temperature, air pressure of the sprayed solution, preparation of the spraying solution, concentration, pHetc.
Something totally different like zinc-alloy plating, organic coatings, etc. The salt spray methods are all suitable for checking that the quality of a metallic material, with or without corrosion protection, is maintained.
The salt spray test has little application in predicting how materials or surface coatings uso resist corrosion in the real-world, because dun does not create, replicate or accelerate real-world corrosive conditions. ASTM B was the first internationally recognized nsss spray standard, originally published in Synthetic seawater solutions are also commonly specified by some companies and standards. Failure to meet this requirement implies instability in the chemical process of the pre-treatment, or the paint quality, which must be addressed immediately, so that the upcoming batches are of the desired quality.
So if you want to know how to set up a salt spray cabinet or how to make the salt solution, then B is a reference. Monday to Friday – Although there may be a weak correlation between the duration in salt spray test and the expected life of a coating in certain coatings such as hot dip galvanized steelthis test has gained worldwide popularity due to low cost and quick results.
I’ll really appreciate your help Chamber volumes vary from supplier to supplier. The longer the accelerated corrosion test, the longer the process remains out of control, and larger is the loss in the form of non-conforming batches. I suggest that you send some parts out for testing according to the ISO standard to see if they meet the spec. Such details are provided in em appropriate product specifications.
Such tests are commonly referred to as modified salt spray tests.
The appearance of corrosion products rust or other oxides is evaluated after a pre-determined period of time. From beautiful Pine Beach New Jersey: Although the majority of salt spray tests are continuous, i.
Salt spray tests in accordance with DIN EN ISO NSS / AASS / CASS | IGOS, Solingen
For this reason the salt spray test is most often deployed in a quality audit role, where, for example, it can be used to check the effectiveness of a production process, such as the surface coating of a metallic part. For example, a typical electroplated zinc and yellow passivated steel part lasts 96 hours in salt spray test without white rust.
Check out our FAQs. Remember that accelerated testing is not a proper indication of real world performance. This is followed by 0. What do you want to test? Test specimens are placed in an enclosed chamber, and exposed to 1 of 2 possible changing climate cycles. Other test solutions have other chemicals added including acetic acid often abbreviated to ASS and acetic acid with copper chloride often abbreviated to CASS each one chosen for the evaluation of decorative coatings, such as electroplated copper-nickel-chromium, electroplated copper-nickel or anodized aluminum.
Test specimens are placed in an enclosed chamber, and exposed to a changing climate that comprises the following 3 part repeating cycle. Hi David, There are several differences between the two specifications, including salt concentration range, salt analysis, water quality, angle of inclination of test panels, corrosivity requirements, I think the temperature is about the only thing that has been standardised.
Retrieved from ” https: Nds corrosion testing is better suited to this. They are not intended to be used for comparative testing as a means of sin different materials relative to each other with respect to corrosion resistance or as means of predicting long-term corrosion resistance of the tested material.
A requirement that a component ‘pass’ an accelerated corrosion test isn’t often meaningful until the finishing spec tells you what that means: In either case, the exposure to salt spray may be salt water spray or synthetic sea water prepared in accordance with the requirements of the test standard.
Options include the following: Painted surfaces with nsw underlying hot-dip galvanized coating can be tested according to this method.